Deep draw manufacturing forms metal into a seamless round, square or rectangular shape called an enclosure, or case. To be considered deep drawn, the height of the case is usually at least two times the diameter. Deep drawn cases are used to enclose technology, especially in demanding environments or whenever tight tolerances and reliability are important. The deep draw process starts when a flat piece of metal, called a blank or disc, is placed over a cavity called a die. A punch then forces the metal through the die, forming it into a shape. These precision punches and dies are known as tooling. The tooling is set up in power presses which produce the tonnage, or energy, needed to force the material through the draw process. During the draw process the material moves into the shape of the die. The flow of material is controlled through pressure ap-plied to the blank and lubrication applied to the die or the blank. Each draw operation is a sepa-rate step and each step reduces the diameter and increases the height of the part. It may take five or more draws, also called reductions, to achieve the final shape. Many factors, including material type and thickness, corner and bottom radii, and shape, determine the number of re-ductions required to make an enclosure.
The strength of Haizol for Deep Draw
We are partnering with the best supplier in the latest Deep Draw processes with proprie-tary technology to deliver high quality, low cost custom made machined components from Asia. The whole ordering process is transparent and you will get update of your order with our Order Monitoring System.